• API 5CT N80 casing and tubing pipe
• API 5CT K55 casing and tubing pipe
• API 5CT J55 casing and tubing pipe
• EN10028-2 16Mo3 Boiler and Pressure Vessel steel Plate Notch impact energy
• EN10028-2 P265GH Pressure vessels steel equivalents
• EN 10210 S355J2H low alloy carbon structural steel
• EN 10210 S355J0H steel hollow materials
• GB/T 18248 34CrMo4
• GB/T 18248 35CrMo alloy steel
• 30CrMo steel Heat treatment, 30CrMo steel tube/pipe

303 stainless steel Physical Property,303 stainless steel Chemical Composition

303 stainless steel is a non-magnetic, austenitic stainless steel that is not hardenable by heat treatment. It is the free machining modification of the basic 18% chromium / 8% nickel stainless steel.

303 stainless steel Chemical Composition
Carbon 0.15 max
Chromium 17 - 19
Iron Balance
Manganese 2 max
Molybdenum 0.6 max
Nickel 8 - 10
Phosphorus 0.2 max
Silicon 1 max
Sulphur 0.15 min

303 stainless steel Physical Property
Density 8.03 g/cm³
Melting Point 1455 °C
Thermal Expansion 17.3 x10^-6 /K
Modulus of Elasticity 193 GPa
Thermal Conductivity 16.3 W/m.K
Electrical Resistivity 0.072 x10^-6 Ω .m

303 stainless steel Mechanical Property
Proof Stress 190 Min MPa
Tensile Strength 500 to 700 MPa
Elongation A50 mm 35 Min %

Alloy 303 was specially designed to exhibit improved machinability while maintaining good mechanical and corrosion resistant properties Due to the presence of sulfur in the steel composition, Alloy 303 is the most readily machineable austenitic stainless steel; however, the sulfur addition does lower Alloy 303's corrosion resistance to below that of Alloy 304. Like other austenitic grades, Alloy 303 demonstrates excellent toughness, although the sulfur does reduce this a little as well.

so for more information about 303 stainless steel Chemical Composition or 303 stainless steel Physical Property , please contact katalor!