EN 10025-2 S235J0 steel

Posted:2011-10-27 13:54:07

Non-alloy structural steels
Material no. 1.0114
according to EN 10025-2
Tensile strength class A

S235J0 steel Usage
Hot rolled products of structural steels EN 10025-2 S235J0 steel equal to Chinese
standard steel grade GB_Q235C.These two steel grades are both done low
Temperature impacting test at zero centi degree

Suitability for coldforming such as bending, folding, bordering and flanging etc. S235j0 steel can be ordered separately. The user of S235j0 steel must make sure that his calculation, design and processing methods are appropriate for the material. The welding technique used must be suitable for the intended application and comply with the state-of-theart. With distinctly closer chemical composition values and mechanical properties, S235j0 steel is used as material for wheels of passenger cars, lorries and other vehicles.

S235j0 steel Chemical composition

Grade	C≤ 16mm max	C>16mm max	Si max	Mn max	P max.	S max.
S235J0	0.17	0.17	--	1.40	0.045	0.045

1) The maximum nitrogen content shall not apply if the total aluminium content of the steel is at least 0.020% or if it contains enough other nitrogenfixing elements.
2) Copper contents higher than 0.400% can cause exfoliation corrosion.
3) Maximum carbon equivalent value
CE = C + Mn /6 + (Cr + Mo + V) /5 + (Cu + Ni) /15

S235j0 steel Mechanical properties

Thickness S235J0	Yield Strength ReH [N/mm2] transv.min.	Tensile Strength Rm [N/mm2] transv.	Fracture Elongation[%]transv. min.
t≤ 16mm t >16mm	235 225
t < 3mm t ≥ 3mm		360-510 340-470
Up to 1.5mm 1.51-2.00mm 2.01-2.50mm 2.51-2.99mm ≥ 3mm			16 17 18 19 24

InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!

Name:	*
E-mail:	*
Country:	*
Tel:

Company:
Language:
Product:	steel plate steel pipe shipbuilding steel
Message:	Please enter details such as Material, Specification, Quantity, Port, other requirments !

Link

steel plate