Contact us
  • : 0086-21-61182423
  • : 0086-21-61182425
  • : [email protected]
  • : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
You are here: Home > NewsEN10025 S235JRG2 steel plate

EN10025 S235JRG2 steel plate

Posted:2011-10-27 13:58:22

S235JRG2,S235JRG2 steel plate,EN S235JRG2 steel, EN 10025 S235JRG2.

S235JRG2 steel is a specific one and has no different classes. It was regulated in EuroNorm EN 10025 superseded by EN 10025-2 (2006) and the new designation is just S235JR. Both editions deal with "structural" steels.

The designation given is the symbolic one, the numerical designation of material is 1.0038.

The symbolic designation means:
S- "Structural Grade"
235- minimum value of yield strength in MPa ( roughly 35 ksi) for thicknesses ut to 16 mm.
JR- Base steel (Charpy impact test not obligatory, optional only)
G2- Rimming steel not allowed.

More characteristics of this plain carbon steel available in long (Profiles, beams..) and flat products (sheet and plates) are:
Impact value (if specifically required)- 27 J at 20ºC
Carbon content:0.17% max. (0.20% for thicknesses over 40 mm)
Mn content: 1.40% max
P and S content: 0.045% max.
N content: 0.009% max (Not applicable if Al minimun is 0.020%)

ASTM steel S235JRG2 steel has different uses (can be applied to pressure service for example) even if it's a carbon steel too. The different grades refer to different strength grades.
If you want to use EN steels according to EN 10025, there are some other designations for different strength grades (for example S275 or S355 which have a higher yield strength.)

S235JRG2 steel plate Chemical analysis -% by mass*

Chemical elements C≤ 16mm
max
C>16mm
max
Si
max
Mn
max
P
max.
S
max.
%,by mass 0.17 0.17 -- 1.40 0.045 0.045

S235JRG2 steel sheet Mechanical properties

thickness Yield Strength ReH[N/mm2]transv.min. Tensile
Strength
Rm[N/mm2]transv.
Fracture Elongation[%]transv. min. Notch ImpactEnergy1)Ch Vcomplete samplelongitud. min [J]
t≤ 16mm
t >16mm
235
225

Degree: 20
AV: 27J

t < 3mm
t ≥ 3mm
360-510
340-470
Up to 1.5mm
1.51-2.00mm
2.01-2.50mm
2.51-2.99mm
≥ 3mm
16
17
18
19
24

Shanghai Katalor Industry Co., Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer's expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As S235JRG2 Mechanical and S235JRG2 suppliers,we can supply S235JRG2 Chemical,S235JRG2 Mechanical and S235JRG2 standard for you ,please contact our e-mail to get it.

InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!
Name: *
E-mail: *
Country: *
Tel:
 
Company:
Language:
Product: steel plate steel pipe shipbuilding steel
Message: Please enter details such as Material, Specification, Quantity, Port, other requirments !
 
Copyright © 2018 by Shanghai Katalor Enterprises Co., Ltd. All rights reserved