- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- API 5CT N80 casing and tubing pipe
- API 5CT K55 casing and tubing pipe
- API 5CT J55 casing and tubing pipe
- EN10028-2 16Mo3 Boiler and Pressure Vessel steel Plate Notch impact energy
- EN10028-2 P265GH Pressure vessels steel equivalents
- EN 10210 S355J2H low alloy carbon structural steel
- EN 10210 S355J0H steel hollow materials
- GB/T 18248 34CrMo4
- GB/T 18248 35CrMo alloy steel
- 30CrMo steel Heat treatment, 30CrMo steel tube/pipe
S460N and S460NL normalized structural steel plate
With minimum yield strength 460Mpa,S460N steel and S460NL steel can work in the normal strength situiations when construction.
Besides the impacting test and Normalized heat treatment, customers usually indicate the following technical terms in their P/O:
I. PWHT (Simulated post-weld heat treatment), instruct temperature and time when rolling.
II. Ultrasonic examination or named UT.
III. DWTT for steel plate straight test.
IV. The third party inspection.
Our mill definately would issue all the above tests result on our MTC paper for customers' checking when finished rolling. We give the chemical elements contains sheet as bellows:
Steel Grade
S460N and S460NL Chemical Composition Max Heat Analysis
Grade | C max |
Si max |
Mn | P max |
S max. |
Cu max |
Cr max |
Ni max |
V max |
Nb max |
Al min |
||||
S460N | 0.20 | 0.60 | 1.00-1.70 | 0.030 | 0.025 | 0.55 | 0.30 | 0.50 | 0.12 | 0.05 | 0.02 | ||||
S460NL | 0.20 | 0.60 | 1.00-1.70 | 0.025 | 0.020 | 0.55 | 0.30 | 0.80 | 0.20 | 0.05 | 0.02 |
S460N and S460NL Mechanical properties
Thickness | Yield Strength ReH [N/mm2] transv.min. |
Tensile Strength Rm [N/mm2] transv. | Fracture Elongation[%]transv. min. | Notch Impact Energy1)Ch Vcomplete samplelongitud. min [J] |
||||
S460NL | S460N | S460NL | S460N | S460NL | S460N | S460NL | ||
t≤ 16mm t >16mm |
460 440 |
- | - |
+20 KV 31J |
+20 KV 40J |
|||
T < 3mm |
- | 540-720 | - | |||||
Up to 1.5mm |
- | - | 17 |