- : 0086-18317160019
- : [email protected]
- : ROOM 101 NO.16, 6TH BUILDING, 9TH LANE,GUANGYI ROAD,ZHUQIAO TOWN,PUDONG NEW AREA,SHANGHAI
- API 5CT N80 casing and tubing pipe
- API 5CT K55 casing and tubing pipe
- API 5CT J55 casing and tubing pipe
- EN10028-2 16Mo3 Boiler and Pressure Vessel steel Plate Notch impact energy
- EN10028-2 P265GH Pressure vessels steel equivalents
- EN 10210 S355J2H low alloy carbon structural steel
- EN 10210 S355J0H steel hollow materials
- GB/T 18248 34CrMo4
- GB/T 18248 35CrMo alloy steel
- 30CrMo steel Heat treatment, 30CrMo steel tube/pipe
EN 10113-3 S355ML steel
S355ML steel plate/sheet, EN 10113-3 S355ML steel plate/sheet, S355ML steel plate/sheet supplier/Chinese supplier, S355ML steel plate/sheet price, S355ML steel plate/sheet mechanical property.
EN 10113-3 S355ML steel equivalent grades:
S355ML steel plate/sheet is in EN 10113-3 standard, the grade number is 1.8834. The equivalent materials of S355M steel are SEW 083 TStE 355 TM, NFA 36-201 E 355 FP, UNI 7382 Fe E 355 KTTM, BS 4360 50 EE, ASTM A 633 Gr.C.
S355ML |
Comparision of steel grades |
|
SEW 083 |
TStE 355 TM |
|
NFA 36-201 |
E 355 FP |
|
UNI 7382 |
Fe E 355 KTTM |
|
BS 4360 |
50 EE |
|
ASTM |
A 633 Gr.C |
EN 10113-3 S355ML steel chemical composition %:
Main chemical composition in EN 10113-3 S355ML steel is carton max 0.14, silicon max 0.50, manganese max 1.60, phosphorus max 0.025, Sulphur max 0.025, chromium max 0.30. More detailed information about S355ML steel, please refer to the down table:
Grade |
C |
Si |
Mn |
P |
S |
N |
AL |
Nb |
V |
Ti |
Cr |
Ni |
Mo |
Cu |
CEV |
S355ML |
0.14% |
0.50% |
1.60% |
0.025% |
0.025% |
0.02% |
0.02% |
0.05% |
0.10% |
0.05% |
0.30% |
0.50% |
0.10% |
0.55% |
0.45% |
EN 10113-3 S355ML steel mechanical property:
EN10113-3 S355ML is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S means the structural steel, M means the delivery condition.Capital letter L for the quality with specified minimum values of values of impact energy at temperature not lower than -50 degree.
Temperature |
-50 |
-40 |
-30 |
-20 |
-10 |
0 |
20 |
Notch impact test. Min. absorbed energy |
27 |
31 |
40 |
47 |
51 |
55 |
63 |
Nominal thickness(mm) |
to 16 |
16-40 |
40-63 |
63-80 |
80-100 |
100-120 |
ReH-Minimun yield strength(Mpa) |
355 |
345 |
335 |
325 |
325 |
320 |
Nominal thickness(mm) |
to 40 |
40-63 |
63-80 |
80-100 |
100-120 |
Rm-Tensile strength(Mpa) |
470-630 |
450-610 |
440-600 |
440-600 |
430-590 |
Nominal thickness(mm) |
- |
||||
A-Minimum elongation |
22 |
Shanghai Katalor Industry Co., Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As S355ML Mechanical and S355ML suppliers,we can supply S355ML Chemical,S355ML Mechanical and S355ML standard for you ,please click to contact us