- : 0086-18317160019
- : [email protected]
- : ROOM 101 NO.16, 6TH BUILDING, 9TH LANE,GUANGYI ROAD,ZHUQIAO TOWN,PUDONG NEW AREA,SHANGHAI
- API 5CT N80 casing and tubing pipe
- API 5CT K55 casing and tubing pipe
- API 5CT J55 casing and tubing pipe
- EN10028-2 16Mo3 Boiler and Pressure Vessel steel Plate Notch impact energy
- EN10028-2 P265GH Pressure vessels steel equivalents
- EN 10210 S355J2H low alloy carbon structural steel
- EN 10210 S355J0H steel hollow materials
- GB/T 18248 34CrMo4
- GB/T 18248 35CrMo alloy steel
- 30CrMo steel Heat treatment, 30CrMo steel tube/pipe
EN10111 DD11 steel plate
DD11,DD11 steel plate,EN10111 DD11 steel plate, under EN standard, EN10111 DD11 steel plate/sheet for stamping and cold forming steels,DD11 steel supplier/Chinese supplier, DD11 steel price,DD11 steel manufacturer.
DD11 steel plate/sheet is in EN10111 standard. It's grade Number is 1.0332. The equal material of DD11 is: DIN 1614 STW22, NFA 36-301 1C, UNI5867 FEP11, BS1449 HR3,UNE36.093 AP11, ASTM-SAE A621DQ-SAE1010,JIS G 3131 SPHD.
DD11 EN 10111 Number: 1.0332 |
Comparison of steel grades |
|
|
UNI5867 |
FEP11 |
|
|
DIN1614 |
STW22 |
|
|
NFA 36-301 |
1C |
|
|
JIS G 3131 |
SPHD |
|
|
ASTM-SAE |
A621DQ-SAE1010 |
|
|
BS1449 |
HR3 |
|
|
UNE36.093 |
AP11 |
|
Main chemical composition in EN10111 DD11 steel: Carbon:max 0.12, Manganese max 0.60, Sulphur max 0.045, Phosphorus max 0.045. More detailed information, please refer to the flowing table:
DD11 steel Chemical analysis -% by mass*
Chemical elements |
C |
Si |
Mn |
P |
S |
|
DD11 |
0.12 |
-- |
0.60 |
0.045 |
0.045 |
EN10111 DD11 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's tensile strength is around 440 MPa (there is different min strength point at the different thickness.) DD11 yield strength is from 170MPa to 340 MPa. (different min strength point at the different thickness.) More detailed information about EN10111 DD11 steel Mechanical Properties , please refer to the following table:
Mechanical properties
thickness |
Yield Strength ReH [N/mm2] |
Tensile Strength Rm [N/mm2] transv. |
Fracture Elongation[%]transv. min. |
Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
|
t≤ 16mm |
170-340 |
1 S |
||
|
t < 3mm |
440 |
|||
|
Up to 1.5mm |
23 A80 28 A5 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As DD11 Mechanical and DD11 suppliers,we can supply DD11 Chemical,DD11 Mechanical and DD11 standard for you ,please click to contact us