- : 0086-18317160019
- : [email protected]
- : ROOM 101 NO.16, 6TH BUILDING, 9TH LANE,GUANGYI ROAD,ZHUQIAO TOWN,PUDONG NEW AREA,SHANGHAI
- API 5CT N80 casing and tubing pipe
- API 5CT K55 casing and tubing pipe
- API 5CT J55 casing and tubing pipe
- EN10028-2 16Mo3 Boiler and Pressure Vessel steel Plate Notch impact energy
- EN10028-2 P265GH Pressure vessels steel equivalents
- EN 10210 S355J2H low alloy carbon structural steel
- EN 10210 S355J0H steel hollow materials
- GB/T 18248 34CrMo4
- GB/T 18248 35CrMo alloy steel
- 30CrMo steel Heat treatment, 30CrMo steel tube/pipe
EN10111 DD12 steel plate
DD12,DD12 steel plate, EN10111 DD12 steel plate, under EN standard, EN10111 DD12 steel plate/sheet for stamping and cold forming steels,DD12 steel supplier/Chinese supplier, DD12 steel price,DD12 steel manufacturer.
DD12 steel plate/sheet is in EN10111 standard. It's grade Number is 1.0398. The equal material of DD12 is: DIN 1614 RRSTW23,ASTM-SAE A621DQ-SAE1008,JIS G 3131 SPHE.
DD12 |
Comparison of steel grades |
|
UNI5867 |
- |
|
DIN1614 |
RRSTW23 |
|
NFA 36-301 |
- |
|
JIS G 3131 |
SPHE |
|
ASTM-SAE |
A621DQ-SAE1008 |
|
UNE36.093 |
- |
Main chemical composition in EN10111 DD12 steel: Carbon max 0.10, Manganese max 0.45,Phosphorus max 0.035, Sulphur max 0.035,More detailed information,please refer to the flowing table:
DD12 steel Chemical analysis -% by mass*
Chemical elements |
C |
Si |
Mn |
P |
S |
DD12 |
0.10 |
-- |
0.45 |
0.035 |
0.035 |
EN10111 DD12 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's yield strength is between 170 to 320 MPa (there is different min strength point at the different thickness.) DD12 tensile strength is from around 420 MPa. (different min strength point at the different thickness.) More detailed information about EN10111 DD12 steel Mechanical Properties , please refer to the following table:
Mechanical properties
thickness |
Yield Strength ReH [N/mm2] |
Tensile Strength Rm [N/mm2] transv. |
Fracture Elongation[%]transv. min. |
Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
t≤ 16mm |
170-320 |
0 S |
||
t < 3mm |
420 |
|||
Up to 1.5mm |
25 A80 30 A5 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As DD12 Mechanical and DD12 suppliers,we can supply DD12 Chemical,DD12 Mechanical and DD12 standard for you ,please click to contact us