- : 0086-18317160019
- : [email protected]
- : ROOM 101 NO.16, 6TH BUILDING, 9TH LANE,GUANGYI ROAD,ZHUQIAO TOWN,PUDONG NEW AREA,SHANGHAI
- API 5CT N80 casing and tubing pipe
- API 5CT K55 casing and tubing pipe
- API 5CT J55 casing and tubing pipe
- EN10028-2 16Mo3 Boiler and Pressure Vessel steel Plate Notch impact energy
- EN10028-2 P265GH Pressure vessels steel equivalents
- EN 10210 S355J2H low alloy carbon structural steel
- EN 10210 S355J0H steel hollow materials
- GB/T 18248 34CrMo4
- GB/T 18248 35CrMo alloy steel
- 30CrMo steel Heat treatment, 30CrMo steel tube/pipe
EN10111 DD13 steel plate
DD13,DD13 steel plate,EN10111 DD13 steel plate, under EN standard, EN10111 DD13 steel plate/sheet for stamping and cold forming steels,DD13 steel supplier/Chinese supplier, DD13 steel price,DD13 steel manufacturer.
DD13 steel plate/sheet is in EN10111 standard. It's grade Number is 1.0335. The equal material of DD13 is:NFA 36-301 3C, UNI5867 FEP13, BS1449 HR1,UNE36.093 AP13, ASTM-SAE A621DQ-SAE1006AK,JIS G 3131 SPHE AK.
DD13 EN 10111 Number: 1.0335 |
Comparison of steel grades |
|
|
UNI5867 |
FEP13 |
|
|
BS1449 |
HR1 |
|
|
NFA 36-301 |
3C |
|
|
JIS G 3131 |
SPHE AK |
|
|
ASTM-SAE |
A621DQ-SAE1006AK |
|
|
UNE36.093 |
AP13 |
|
Main chemical composition in EN10111 DD13 steel: Carbon:max 0.08, Manganese max 0.40, Sulphur max 0.030, Phosphorus max 0.030. More detailed information, please refer to the flowing table:
EN 10111 DD13 Chemical analysis -% by mass*
Chemical elements |
C |
Si |
Mn |
P |
S |
|
DD13 |
0.08 |
-- |
0.40 |
0.030 |
0.030 |
EN10111 DD13 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's yield strength is between 170 to 310 MPa (there is different min strength point at the different thickness.) DD13 tensile strength is around 400 MPa. (different min strength point at the different thickness.) More detailed information about EN10111 DD13 steel Mechanical Properties , please refer to the following table:
Mechanical properties
thickness |
Yield Strength ReH [N/mm2] |
Tensile Strength Rm [N/mm2] transv. |
Fracture Elongation[%]transv. min. |
Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
|
t≤ 16mm |
170-310 |
0 S |
||
|
t < 3mm |
400 |
|||
|
Up to 1.5mm |
28 A80 33 A5 |
Shanghai katalor industry CO.,Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As DD13 Mechanical and DD13 suppliers,we can supply DD13 Chemical,DD13 Mechanical and DD13 standard for you ,please click to contact us